We know our selection of tools isn't large. We are tying to carry some of the quality tools we personally use the most... and we're about 30% cheaper than other small tool specialists!
"F" Clamp - small (Package of 2)
These clamps will hold structures and other items together up to 3 1/4" wide and have a 1" depth to them.
"F" Clamp - large (Package of 2)
These clamps will hold structures and other items together up to 7 1/2" wide and have a 2" depth to them.
The fine pointed tweezers have a slide lock in them to help prevent the items being held from falling out and becoming lost.
The sharp tweezers have a very small and sharp point for handling very small items.
The curved tweezers have a small bend at the end which can help keep the tweezers from blocking your view when glue small items in a tight space.
The small scissors are self opening and are great for cutting decals and other fine small paper of film items. The also work great in trimming shingles along the roofline while completing your craftsman kits.
This pen knife comes with a cap and a #11 blade.
8x12 Cutting Mat
Protect your work surfaces with these green three-ply self-healing cutting mats.the self-healing feature means that cuts will close up virtually disappear and the multiple ply aids in preventing warping.Each mat is calibrated in one inch grid patterns to assist in accurate layouts.
Double Ended Pin Vice Drill
The double ended pin vice saves you time from constantly changing drill bits and accommodates drills from #53 (.0635) thrue #80 (.0125).
20 Piece Drill Set
High speed drill set with numbers #61 to #80 (.016" to .039") in clear plastic covered indexed base
1/4" Pounce Wheel
18 teeth per inch. These are great for making nail holes in wood siding. This pounce wheel works great with thin rulers.
7/16" Pounce Wheel
18 teeth per inch. These are great for making nail holes in wood siding. This pounce wheel works better agains thicker rulers.
Deluxe Model Railroad Ruler
Constructed of 12 1/2" long non-glare gold anodized aluminum with black calibrations in N, HO, O and G (1/24) scales, 64th and mm along with a guide for converting decimal equivalents to drill sizes for small screws. The black photo-anodized calibrations will not fade or chip when cleaned with solvents
© Bollinger Edgerly Scale Trains. Legal.